Available Pieces For Purchase

I know you all are Probably thinking “this isn’t her style at all!”…. And you’re right!  But every once and a while you need to step out of your comfort zone and try a different look.   For whatever reason this table gave me a sense of like uptown city glitzy style or upscale condo living so I decided to follow that feeling.  

First was to sand off all that old dark stained pine and bring out the light wood grain.  I did need to add a chalked white wash to give it an even lighter look and then I sealed it with a couple coats of Minwax Polyacrylic in Ultra Flat.  The bottom metal base was sprayed in Rust-Oleum Paint and Primer Metallic Gold.  

This accent table measure in at 

25” d x 26” w x 21 1/2” h (of course ut can be rotated for a deeper surface)

Would look perfect next to a chair, inbetween two sofas or even as a coffee table. There is plenty of stage space below for magazines, books or a throw blanket.

Delivery available for a fee based on buyers location otherwise pickup at my shop in Branchville NJ 

Asking $165

Just finished another super sweet Vintage Telephone Bench.  This one is on the smaller compact size which would allows it to fit anywhere in your home!
One of my customers had given me this fabric and I have been dying to use it.  It’s soft green, tans and beiges with a hint of yellow matches perfectly with the wood tones and the shade of Burlap paint.  I also accented the backrest edges and armrest in Pine.   The entire piece was sealed for extra protection.
This piece measures 24” w x 31” h x 19 1/2” d
Delivery available for a fee otherwise it can be picked up at my shop in Branchville.

Asking $145

So who says you can’t love some color and happiness in your life!!!!!
I know this is completely outside of my box but I had to reach out to my customers who love color!!!   I’m trying once again to create art with the ombré technique and this was an experiment.    I opted to sand down the top of this sweet accent pie crust ball and claw table with hopes of bringing it to life.   
I embraced and sealed the lighter shade of wood grain on the top so I chose paint a warm color palette underneath…almost like a sunset.  The colors I chose were General Finishes Tuscan Red, DB Apricot and Cayenne followed by some Fluff along the edges.   All of these blended colors were sealed in a satin finish.  The top was also sealed in Minwax Polyacrylic.   Last was to accent all those carving with a gold gilding wax.
This sweet accent table would make a wonderful plant stand or even and accent table next to a side chair.  
Measures in at 22” h by 16” round

Delivery for a fee based on buyers location otherwise pickup at my shop in Branchville

Asking $110

Is anyone looking for that accent piece of furniture to compliment their French Farmhouse neutral pallet?   Well take a look at the unique three tier shelving piece!   Remembering what this piece looked like when I purchased It makes me shake my head but I really loved the lines and height of its design  
A lot of sanding needed to done to remove all the flaking paint.   I decided I wanted a neutral look so I opted to completely sand down the top, all the shelves and the drawer face and then lightly white wash them.  The rest of the piece was painted in Drop cloth and then sealed.    The drawer was updated with s new knob along with a newly fabric lined drawer 

Such a cool piece that can be placed anywhere from s bedroom to s bathroom or even a living room.    This piece measures in at
47 1/2” h x 12” x 13” base

Delivery available for a fee based on buyers location otherwise pickup at my shop in Branchville

Asking $159

Now here is a fun and stylish piece!!!
This Vintage Arlington Sewing  machine base was converted into a nice clean lined piece by simply adding a kidney shaped piece of glass!   If your looking for a nice accent table, small work space or even a vanity then take a look at this repurposed beauty.  I can’t take credit for the design only for the clean up and painting on the base.  Generally I see these pieces with a new wood or tile top so I’m loving this new glass top look!

This piece measures in at
36 1/2” w x 18 1/2” d x 28 “ h.  The glass is removable for easy transport.   
Delivery available for a fee otherwise pickup at my shop in Branchville

Asking $235
Chair sold separately

I think I finally finished up The Red-Winged Blackbird Washstand!   
This little piece progressed slowly because I just want sure where I was going with it!   I do appreciate all the input from everyone especially  Ed Stefkovich who really helped with the bird and birdhouse.  It’s also nice to know that the Red-Winged Blackbird  am be spotted in the Sussex County Area!
The refinishing itself started with sanding the top and inside then applying several coats of Minwax Polyurethane to seal that. Ray study l wood.  Next I had originally planned on using an appliqué but changed my mind and just started to free hand paint everything.  The sides of the piece are also painted but just with a blended technique using the shades and colors same as the sky and grass like on the front of the washstand.  The original drawer pulls were sprayed in Rust-Oleum oiled bronze and I found a vintage brass pull for the door that looks like a flower so I just painted red to blend in with the Poppies.  
This is quite  a versatile piece that could be used anywhere in your home.  It’s has some nice storage and measures in at
35 1/2” w x 19 3/4” d x 28 1/2” h

Delivery available for a fee based on buyers location. Otherwise pickup at my shop in Branchville, NJ

Asking $295

Just finished sprucing up this MCM Coffee Table. It looked pretty sad when found and I have no idea what theme the paint schema was but now it looks so much better!
I sanded down the piece and kept the natural wood top. Just added a couple coats of Minwax Polyacrylic to seal.  The rest if the piece was hand painted in DB Silk Cactus.  It has a nice soft matte finish
This is a nice size coffee table if your space doesn’t offer a lot of room. It measures in at
34 1/2” w x 18 1/2” d x 17 3/4” h

Delivery available for a fee otherwise pickup at my shop in Branchville

Asking $100

Look at these fabulous MCM End Tables with their clean lines and natural wood finish!   I’m not usually a big fan of this time period but I do admit that I really like this over all refinish job.  Many designers are adding natural wood tones into their room plans and they are doing this with furniture, ceiling beams, neutral area rugs and light accent pieces.  Tell me this set of tables wouldn’t be perfect next to a stream line couch in an open living room with lots of light?

I’m not sure what the finish was on these but whatever it was it now resides inside my Festool saw dust collector…lol.  I wanted to get down to the natural would finish and once I did that I opted to seal the surfaces in Minwax Polyacrylic Ultra Flat.  It was the perfect topcoat for this look!

Each table measure in at
17” w x 27 “ d x 22 1/2” h.  
Delivery available for a fee otherwise pickup at my shop in Branchville 

Asking $325 set!

I just finished up this fun Repurpose Project!  I mean honestly, the thought of any piece of furniture being dumped in a landfill just drives me crazy.  Solid wood furniture is meant to last the test of time so even when these pieces have been bruised, battered and worn I believe we still can find other purposes for them.  This was the case with this sad desk!

One of Peter’s coworkers (Thank you sooo much Marci) asked if I wanted this desk and of course I said yes sight unseen.   I was thrilled to see when it arrived it was solid pine but it was quite beat up and the center drawer was missing so I decided to just completely dissemble it and set the wood aside for another day.   Well that day came this week when I envisioned a nice clean straight lined almost MCM desk.  So I sanded that beautiful top down, ordered some Pin legs  and used the lower back apron as an additional shelf.  After sanding I wanted to just keep the natural wood look so I seal coated it in General Finishes Dead flat Top coat.  I also found some old shelf brackets in my stash of junk and was able to use them to lift up and secure the shelf…plus in the process maintain a nice clean black metal design.   
This desk offers so much space.  Measuring out at 48” w x 27” d x 29” h (32” h shelf).  You have plenty of room for your laptop, phone, some smalls and even a lamp.  If your looking for a nice clean piece with that nostalgic look and sleek lines then look no further.  I’m sorry I had to use one of my vintage chairs for staging.  Unfortunately I didn’t have any MCM on Hand

Delivery available for a fee based on buyers location otherwise pickup at my shop in Branchville

Asking $275

Just finished up this Vintage Claw Foot Accent Table with inlaid Trim.   Such a great piece for any small space!
This table was a bit sad but under all that crud I saw some amazing veneer and a unique border of inlaid wood.   I started by sanding the top and all the sides.  Next was to add a custom stain of Minwax Honey and Jacobean for dark accents.   I decided to make a custom color mix for the base of Collared Greens and Olive.   The edges were then lightly distressed and everything was sealed in Minwax Polyurethane.  The metal claw feet were also accented in gold gilding wax
The sweet piece measures in at
26” w x 13” d x 24” h 

Delivery available for a fee based on buyers location otherwise pickup at my store in Branchville

Asking $130

Just finished up this vintage accent table that truly looked like it was ready for the curb!  It was all peeling and literally rocked back and forth on it’s weak wobbly legs.  But these type of pieces are my favorite for repurposing into Blue Line Flag tables so I knew I had to at least try to resuscitate it!!!
For starters I had to work on those poor legs.  I needed to tighten, glue and Brad nail all of them securely to the top.  Next was to sand down the top, lower ties and legs.  I decided to heavily burn the perimeter of both the top and lower tier then clear coat.  The rest of the piece was hand painted in Midnight Sky (Rich deep blue) then heavily distressed.  Last was to add that beautiful Blue Line Flag to the top!!!

This table measures in at 20” square by 29”h
It would make a unique and thoughtful Christmas Present for that Couragous Police Officer in your family!!! 

Delivery available for a fee otherwise pickup at my shop in Branchville. 

Asking $145

This piece immediately drew me in with that unique wooden rope pattern around the top…I think that’s the main reason I bought it!   Unfortunately there was some veneer damage on two drawer faces so I knew I wouldn’t be able to sand up all the drawers and would need to come up with a new design.  

I started by sanding the top which uncovered a beautiful veneer grain.  Next was to remove all the veneer from the two damaged drawers and then sand the top three drawers.  At that point I opted to paint the exterior of the desk and the lower six drawers in Midnight sky.   The rest of the exposed wood was clear coated in several coated of Minwax Polyurethane in Warm Satin.  I chose to keep the original hardware but opted to spray it in Rust-Oleum aged bronze and then hand paint in a blended look with a copper metallic finish.  Three of the dove tailed drawers were lined with Waverly fabric that has soft shades of gray, black and cream.

This desk has lots of storage and what I also love is it can be faced in the outward direction in a room because I refinished the back.  Solid and Sturday I think this vintage piece would be perfect in a bedroom or office.  You also could hand a mirror about it and make it a vanity.

Measurements are 

42” w x 30” h x 20 1/2” d

Delivery available for a fee otherwise pickup at my shop in Branchville, New Jersey

Asking $325

Who doesn’t love the old Antique Washstands?
These pieces are so versatile and can be used in most any room in your home.  An entranceway table, small coffee bar, nightstand or even a TV stand. So many possibilities! 

This piece arruved in its original oak finish which was nice but a bit blah so I decided to add some color and soften it up a bit.  The top was sanded and then whitewashed and sealed with Minwax Polyacrylic to give it that lighter soft color. The base and backsplash was painted in a layering technique using Moss, Duck Egg Blue and a touch of Stormy Seas.  Everything was distressed and sealed. Last was to add lots of brown wax to give it a beautifully aged patina!  The drawer was lined with Waverly fabric and the sides were stenciled in paisleys.  I kept the original metals pulls for the top drawer but chose a ceramic knob with the exact shades of color.  

This piece measures in at
32” w x 16” d x 32” h ( top of backsplash)

Delivery available for a fee otherwise pickup at My shop in branchville

Asking $245

Where are all my MCM Fans???

Picked up this set of chairs this weekend.  You all know I’m not a huge fan of MCM but I LOVE the color of these solid metal based chairs and their thin black legs.   
Set of (4) David Rowland Stackable chairs in orange/red metal. Some scratches, blemishes and wear markers where they have been stacked. Still extremely sturdy! Labels still intact on all four chairs. See attached photos 

Asking $300 set of 4

So I have been delayed in posting this amazing piece only because it’s been so darn difficult to stage this massive beauty…but I just can’t wait any longer…lol
This Vintage Ball and Claw Antique Buffet was manufactured by the “George C Flint Furniture Company”.  Through some research I found From the internet: “One of the best-known furniture makers in New York in the 19th Century, George C. Flint opened his impressive showroom in 1868 at No. 106 West 14th Street, surrounded by other grand emporiums. Within ten years he would have a workshop No. 154 West 19th Street and a leased warehouse at No. 304 West Street. Flint’s key to success was to provide the public with attractive, up-to-date designs at affordable prices.”

I purchased this piece from a home in Newton and literally it has sat in my shop for almost 5 years waiting patiently to be refinished.  Because of its size I was delayed in my endeavor…..

But, a couple weeks ago I was driven to give this piece a new look so I started by sanding down the top and all the drawer faces.  Once the veneer was sanded I opted to burn it to add some depth and character.   All the refinished wood was then sealed in Minwax Polyurethane in Warm Satin.  Next I painted the remainder or the buffet in black and then lightly distressed and sealed the entire piece.
This antique gem is large which makes it a great piece for storage and also for serving due to its height.  If you have a dining room and want a unique piece that eliminates that unwanted China cabinet then I would suggest you take a look at this beauty!
This buffet measures in at
66 1/4” w x 25 1/4” d (center scallop) x 40 1/2” h
There are four dovetailed drawers, a center liquor bottle storage drawer, two swing door areas and the bottom drawer which spans across the entire length of the piece.

Delivery available for a fee based on buyers
Location otherwise pickup at my shop in Branchville.  Better bring a BIG vehicle!

Asking $925

These amazing Solid Oak Wire Doors were purchased from an estate where they had been used many years ago as kitchen cabinet doors.   I decided to sand them down and then burn the oak to accentuate the grain and then clear coated them in polyurethane   I also purchased and installed heavy glass which is the perfect serving surface which can be cleaned easily  Last was to attach Vintage Solid Brass French Provincial Pulls for easy serving.

Right now I have (2) boards on hand for purchase.

Asking $95/$85